Which components are necessary plus how and where are these individual Rohloff E-14 2.0 components located on an E-Bike?
 

Overview

The Rohloff E-14 Switch Unit is the interface between rider and bicycle. The E-14 Shifter Unit receives its commands directly from this switch.

A guide to mounting this switch can be found here:
 

Instructions

The Rohloff E-14 Trigger is the interface between rider and bicycle. The E-14 Trigger receives its commands directly from this switch.

A guide to mounting this Trigger can be found here:
 

Instructions

The Rohloff E-14 2.0 DC-CAN Adapter* is the central electronic connection between both the Bosch eBike System and the Rohloff E-14 2.0 system. It provides and controls the energy supply and communication between all comonents.

A guide to mounting the DC-CAN Adapter* can be found here:
 

instructions

replaced by Rohloff E-14 2.0 DC-CAN Adapter2 (8802-05)

How should one fit and/or remove the E-14 equipped SPEEDHUB wheel from the bicycle?
 

instructions

Various different service tasks such as the removal of certain components (e.g. brake rotors) or the complete replacement of the E-14 Shiter Unit will require that the Rohloff E-14 Shifter Unit is removed from the SPEEDHUB 500/14.

How do I go about removing the Rohloff E-14 Shifter Unit from the SPEEDHUB 500/14? Find out here:
 

Instructions

In these instructions you will learn how the brake disc can be mounted on a spoked wheel in conjunction with the E-14 shifting unit.

Assembly brake disc

What needs to be paid careful attention to? Which cable connectors are used where? Find out here:
 

instructions