A12 Form

Here you find the form that accompanies you during the A12 compatibility check. It is best to leave the form open during the process. So you can enter the results of each measurement, as you go along.

Information about the A12 thru axle system and how the compatibility check works can be found here.

Form for the A12 compatibility check

Bicycle Workshop Contact Details
A12 Quote or Order?
  • Quote: You wish to receive an exact quote for the hub and accessories to inform your customer of the costs? No problem! We can process this for you prior to placing your order.
  • Order: If you are already aware of the costs and wish to accelerate the process.
Bicycle Frame
We deliver a chain tensioner for the A12 model.
Be sure to read the belt manufacturer's installation instructions.
Be sure to read the Gates Carbon Drive installation requirements regarding the frame stiffness and 'Snubber' use.
Selection SPEEDHUB
Compatibility Check
Important:
Paragon Machine Works dropouts PA/PB 454/453 and DR/B 4056/4055 not compatible with Gates Carbon Drive. Snubber fitment not possible!
Second Measurement process using Measurement Gauge
Second Measurement process using Measurement Gauge
When using a SRAM UDH derailleur hanger, no measurement with a caliper on the sprocket side (right) is required.
Second Measurement process using Measurement Gauge
Second Measurement process using Measurement Gauge
When using a SRAM UDH derailleur hanger, no measurement with a caliper on the sprocket side (right) is required.
Second Measurement process using Measurement Gauge
Second Measurement process using Measurement Gauge
When using a SRAM UDH derailleur hanger, no measurement with a caliper on the sprocket side (right) is required.
Second Measurement process using Measurement Gauge
Second Measurement process using Measurement Gauge
When using a SRAM UDH derailleur hanger, no measurement with a caliper on the sprocket side (right) is required.
Second Measurement process using Measurement Gauge
Second Measurement process using Measurement Gauge
When using a SRAM UDH derailleur hanger, no measurement with a caliper on the sprocket side (right) is required.
Spokes
Spokes are supplied in packs of 37 units including lock-nipples of the same color.
All boxes marked with an * are mandatory and must be completed in full.