E-14 Trigger

A short assembly guide and quick-start instructions can be found here:

Quick-Start User Guide

  1. Shift into higher gears: Depress lever 1 using your thumb (in direction A) or pull by using your index finger (in direction B).
  2. Shift into lower gears: Depress lever 2 using your thumb (in direction C).
  3. One lever activation shifts one gear.
  4. Holding the lever in its activated position will activate the Multishift mode.

Short-form Installation Instructions

  1. Only compatible with Ø 22.2 mm (Ø 7/8″) handlebars.
  2. Right-hand only. Mount between brake lever and grip.
  3. Clamp (4) and trigger body (3), formed to avoid incorrect assembly.
  4. Slide E-14 trigger onto handlebar with E-14 cable exiting Trigger towards handlebar stem.
  5. Ensure brakes can be applied without lever colliding with either Trigger or other handlebar-mounted components.
  6. Insert the TX10 screw (5) first, and tighten to 0.8 Nm (0.589 ft/lb). Now insert the second TX10 screw (6) and also tighten to 0.8 Nm (0.589 ft/lb).
  7. Connect the blue, 4-pole connector (7) with the 4-pole connector from the E-14 cable loom.
  8. Test E-14 Trigger functionality.

    Detailed Instructions E-14 (1.0) BES2 including update the Shifter Unit

    Detailed Instructions E-14 2.0 BES3 (Bosch Smart System)