Crankset

The Rohloff SPEEDHUB 500/14 requires a chainline of 54mm and with splined sprocket of 57mm. On bikes with three-ring cranksets, the middle chainring sits on a chainline of 47.5mm (measured from the frame center). The largest chainring has a chainline of 54mm. On most MTB and Trekking bike cranksets, the largest chainring and bottom bracket can normally be reused in conjunction with the Rohloff SPEEDHUB 500/14.

When disassembling the crankset for use with the Rohloff SPEEDHUB 500/14, the middle and smallest chainring will not need to be used, so they must be removed from the crankset. The chainring threaded bushes will be too long, because they are no longer securing two chainrings. For this reason there are five chainring spacers included in the small parts bag (to be found in every package). These should be placed over the threaded bushes before reassembling the crankset, so that the single chainring can be properly and tightly secured. (chainrig bolts: 5mm allen key, lightly greased, tightening torque: 7Nm/61in.lbs.).

Entfaltungstabellen

Distance traveled per crank revolution with 20'' wheels (circumference 1.51 m). In the top row are the sprockets, in the left column the corresponding chainring. Details from-to in meters.

  13 teeth 14 teeth 15 teeth 16 teeth 17 teeth 18 teeth 19 teeth 21 teeth
26 teeth 0.84 - 4.43 0.78 - 4.11            
28 teeth 0.91 - 4.77 0.84 - 4.43 0.79 - 4.13          
30 teeth 0.97 - 5.11 0.90 - 4.75 0.84 - 4.43 0.79 - 4.15        
32 teeth 1.04 - 5.45 0.96 - 5.06 0.90 - 4.73 0.84 - 4.43 0.79 - 4.17      
34 teeth 1.10 - 5.79 1.02 - 5.38 0.95 - 5.02 0.90 - 4.71 0.84 - 4.43 0.80 - 4.18    
36 teeth 1.17 - 6.13 1.08 - 5.70 1.01 - 5.32 0.95 - 4.98 0.89 - 4.69 0.84 - 4.43 0.80 - 4.20  
38 teeth 1.23 - 6.48 1.14 - 6.01 1.07 - 5.61 1.00 - 5.26 0.94 - 4.95 0.89 - 4.68 0.84 - 4.43  
40 teeth 1.30 - 6.82 1.20 - 6.33 1.12 - 5.91 1.05 - 5.54 0.99 - 5.21 0.94 - 4.92 0.89 - 4.66 0.80 - 4.22
42 teeth 1.36 - 7.16 1.26 - 6.65 1.18 - 6.20 1.11 - 5.81 1.04 - 5.47 0.98 - 5.17 0.93 - 4.90 0.84 - 4.43
44 teeth 1.43 - 7.50 1.32 - 6.96 1.24 - 6.50 1.16 - 6.09 1.09 - 5.73 1.03 - 5.41 0.98 - 5.13 0.88 - 4.64
46 teeth 1.49 - 7.84 1.38 - 7.28 1.29 - 6.79 1.21 - 6.37 1.14 - 5.99 1.08 - 5.66 1.02 - 5.36 0.92 - 4.85
48 teeth 1.56 - 8.18 1.44 - 7.59 1.35 - 7.09 1.26 - 6.65 1.19 - 6.25 1.12 - 5.91 1.06 - 5.60 0.96 - 5.06
50 teeth 1.62 - 8.52 1.50 - 7.91 1.40 - 7.38 1.32 - 6.92 1.24 - 6.52 1.17 - 6.15 1.11 - 5.83 1.00 - 5.27
52 teeth 1.69 - 8.86 1.56 - 8.23 1.46 - 7.68 1.37 - 7.20 1.29 - 6.78 1.22 - 6.40 1.15 - 6.06 1.04 - 5.49
54 teeth 1.75 - 9.20 1.62 - 8.54 1.52 - 7.97 1.42 - 7.48 1.34 - 7.04 1.26 - 6.65 1.20 - 6.30 1.08 - 5.70
56 teeth 1.81 - 9.54 1.69 - 8.86 1.57 - 8.27 1.47 - 7.75 1.39 - 7.30 1.31 - 6.89 1.24 - 6.53 1.12 - 5.91

Distance traveled per crank revolution with 26'' wheels (circumference 1.51 m). In the top row are the sprockets, in the left column the corresponding chainring. Details from-to in meters.

  13 teeth 14 teeth 15 teeth 16 teeth 17 teeth 18 teeth 19 teeth 21 teeth
26 teeth 1.15 - 6.04 1.07 - 5.61            
28 teeth 1.24 - 6.51 1.15 - 6.04 1.07 - 5.64          
30 teeth 1.33 - 6.97 1.23 - 6.48 1.15 - 6.04 1.08 - 5.67        
32 teeth 1.41 - 7.44 1.31 - 6.91 1.23 - 6.45 1.15 - 6.04 1.08 - 5.69      
26 teeth 1.50 - 7.90 1.40 - 7.34 1.30 - 6.85 1.22 - 6.42 1.15 - 6.04 1.09 - 5.71    
36 teeth 1.59 - 8.37 1.48 - 7.77 1.38 - 7.25 1.29 - 6.80 1.22 - 6.40 1.15 - 6.04 1.09 - 5.73  
38 teeth 1.68 - 8.83 1.56 - 8.20 1.46 - 7.66 1.37 - 7.18 1.28 - 6.76 1.21 - 6.38 1.15 - 6.04  
40 teeth 1.77 - 9.30 1.64 - 8.63 1.53 - 8.06 1.44 - 7.56 1.35 - 7.11 1.28 - 6.72 1.21 - 6.36 1.09 - 5.76
42 teeth 1.86 - 9.76 1.72 - 9.07 1.61 - 8.46 1.51 - 7.93 1.42 - 7.47 1.34 - 7.05 1.27 - 6.68 1.15 - 6.04
44 teeth 1.95 - 10.23 1.81 - 9.50 1.69 - 8.86 1.58 - 8.31 1.49 - 7.82 1.40 - 7.39 1.33 - 7.00 1.20 - 6.33
46 teeth 2.03 - 10.69 1.89 - 9.93 1.76 - 9.27 1.65 - 8.69 1.56 - 8.18 1.47 - 7.72 1.39 - 7.32 1.26 - 6.62
48 teeth 2.12 - 11.16 1.97 - 10.36 1.84 - 9.67 1.72 - 9.07 1.62 - 8.53 1.53 - 8.06 1.45 - 7.63 1.31 - 6.91

Distance traveled per crank revolution with 28'' wheels (circumference 2.18 m). In the top row are the sprockets, in the left column the corresponding chainring. Details from-to in meters.

  13 teeth 14 teeth 15 teeth 16 teeth 17 teeth 18 teeth 19 teeth 21 teeth
26 teeth 1.22 - 6.40 1.13 - 5.94            
28 teeth 1.31 - 6.89 1.22 - 6.40 1.14 - 5.97          
30 teeth 1.40 - 7.38 1.30 - 6.85 1.22 - 6.40 1.22 - 6.40        
32 teeth 1.50 - 7.87 1.39 - 7.31 1.30 - 6.82 1.22 - 6.40 1.14 - 6.02      
34 teeth 1.59 - 8.36 1.48 - 7.77 1.38 - 7.25 1.29 - 6.80 1.22 - 6.40 1.15 - 6.04    
36 teeth 1.68 - 8.86 1.56 - 8.22 1.46 - 7.68 1.37 - 7.20 1.29 - 6.77 1.22 - 6.40 1.15 - 6.06  
38 teeth 1.78 - 9.35 1.65 - 8.68 1.54 - 8.10 1.44 - 7.60 1.36 - 7.15 1.28 - 6.75 1.22 - 6.40  
40 teeth 1.87 - 9.84 1.74 - 9.14 1.62 - 8.53 1.52 - 8.00 1.43 - 7.52 1.35 - 7.11 1.28 - 6.73 1.16 - 6.09
42 teeth 1.97 - 10.33 1.82 - 9.59 1.70 - 8.95 1.60 - 8.39 1.50 - 7.90 1.42 - 7.46 1.34 - 7.07 1.22 - 6.40
44 teeth 2.06 - 10.82 1.91 - 10.05 1.78 - 9.38 1.67 - 8.79 1.57 - 8.28 1.49 - 7.82 1.41 - 7.41 1.27 - 6.70
46 teeth 2.15 - 11.32 2.00 - 10.51 1.87 - 9.81 1.75 - 9.19 1.65 - 8.65 1.55- 8.17 1.47 - 7.74 1.33 - 7.01
48 teeth 2.25 - 11.81 2.09 - 10.96 1.95 - 10.23 1.82 - 9.59 1.72 - 9.03 1.62 - 8.53 1.54 - 8.08 1.39 - 7.31
50 teeth 2.34 - 12.30 2.17 - 11.42 2.03 - 10.66 1.90 - 9.99 1.79 - 9.41 1.69 - 8.88 1.60 - 8.42 1.45 - 7.61

Distance traveled per crank revolution with 29'' wheels (circumference 2.30 m). In the top row are the sprockets, in the left column the corresponding chainring. Details from-to in meters.

  13 teeth 14 teeth 15 teeth 16 teeth 17 teeth 18 teeth 19 teeth 21 teeth
26 teeth 1.28 - 6.75 1.19 - 6.27            
28 teeth 1.38 - 7.27 1.28 - 6.75 1.20 - 6.30          
30 teeth 1.48 - 7.79 1.38 - 7.23 1.28 - 6.75 1.20 - 6.33        
32 teeth 1.58 - 8.31 1.47 - 7.71 1.37 - 7.20 1.28 - 6.75 1.21 - 6.35      
34 teeth 1.68 - 8.82 1.56 - 8.19 1.45 - 7.65 1.36 - 7.17 1.28 - 6.75 1.21 - 6.37    
36 teeth 1.78 - 9.34 1.65 - 8.68 1.54 - 8.10 1.44 - 7.59 1.36 - 7.15 1.28 - 6.75 1.22 - 6.39  
38 teeth 1.88 - 9.86 1.74 - 9.16 1.63 - 8.55 1.52 - 8.01 1.43 - 7.54 1.35 - 7.12 1.28 - 6.75  
40 teeth 1.97 - 10.38 1.83 - 9.64 1.71 - 9.00 1.60 - 8.44 1.51 - 7.94 1.43 - 7.50 1.35 - 7.10 1.22 - 6.43
42 teeth 2.07 - 10.90 1.93 - 10.12 1.80 - 9.45 1.68 - 8.86 1.59 - 8.34 1.50 - 7.87 1.42 - 7.46 1.28 - 6.75
44 teeth 2.17 - 11.42 2.02 - 10.60 1.88 - 9.90 1.76 - 9.28 1.66 - 8.73 1.57 - 8.25 1.49 - 7.81 1.34 - 7.07

Übersetzungsvergleich Kettenschaltung-SPEEDHUB

Die Tabelle zeigt, welche Kettenübersetzung bei der Rohloff SPEEDHUB 500/14 zu verwenden ist, um dem kleinsten Gang einer Kettenschaltung zu entsprechen.

Zähnezahlkombination kleinster Gang Kettenschaltung 1. Gang Rohloff SPEEDHUB 500/14 Kettenübersetzung
22/40 26/13 28/15 32/16 34/17
24/40 28/13 32/15 34/16 36/17
26/42 28/13 34/15 36/16 38/17
20/34 28/13 32/15 34/16 36/17
22/34 30/13 34/15 38/16 40/17
24/34 32/13 38/15 40/16 44/17
26/34 36/13 42/15 44/16 46/17
20/32 30/13 34/15 36/16 38/17
22/32 32/13 36/15 40/16 42/17
24/32 34/13 40/15 44/16 46/17
26/32 38/13 44/15 46/16 50/17
20/30 32/13 36/15 38/16 40/17
22/30 34/13 40/15 42/16 44/17
24/30 38/13 44/15 46/16 48/17
26/30 40/13 46/15 50/16 52/17

Die Tabelle zeigt, welche Zähnezahlkombination bei der Rohloff SPEEDHUB 500/14 zu verwenden ist, um dem größten Gang einer Kettenschaltung zu entsprechen.

Zähnezahlkombination größter Gang Kettenschaltung 14. Gang Rohloff SPEEDHUB 500/14 Kettenübersetzung
26/10 - 26/15 28/16 30/17
28/10 24/13 28/15 30/16 32/17
30/10 26/13 30/15 32/16 34/17
32/10 28/13 32/15 34/16 38/17
34/10 30/13 34/15 38/16 40/17
36/10 32/13 36/15 40/16 42/17
38/10 34/13 38/15 42/16 44/17
40/10 36/13 40/15 44/16 46/17
42/10 38/13 44/15 46/16 48/17
32/11 26/13 30/15 32/16 34/17
34/11 28/13 32/15 34/16 36/17
36/11 30/13 34/15 36/16 38/17
38/11 30/13 36/15 38/16 40/17
40/11 32/13 38/15 40/16 42/17
42/11 34/13 40/15 42/16 44/17
44/11 36/13 40/15 44/16 46/17
46/11 38/13 42/15 46/16 48/17
48/11 38/13 44/15 48/16 50/17
50/11 40/13 46/15 50/16 52/17
52/11 42/13 48/15 52/16 54/17
54/11 44/13 50/15 54/16 56/17
38/12 28/13 32/15 34/16 36/17
40/12 30/13 34/15 36/16 38/17
42/12 32/13 36/15 38/16 40/17
44/12 32/13 38/15 40/16 42/17
46/12 34/13 40/15 42/16 44/17
48/12 36/13 40/15 44/16 46/17
50/12 36/13 42/15 46/16 48/17
52/12 38/13 44/15 48/16 50/17
54/12 40/13 46/15 50/16 52/17

In der Tabelle kann abgelesen werden, welcher kleinsten bzw. größten Zähnezahlkombination einer Kettenschaltung die vorhandene Übersetzung der Rohloff SPEEDHUB 500/14 entspricht.

Zähnezahlkombination (Kettenblatt/Ritzel) Rohloff SPEEDHUB 500/14 1. Gang entspricht einer Kettenschaltungsübersetzung von 14. Gang entspricht einer Kettenschaltungsübersetzung von
38/13 22/26 24/30 48/11 52/12
40/13 22/25 24/27 50/11 54/12
42/13 22/24 24/26 52/11 56/12
44/13 22/23 24/25 54/11 60/12
46/13 22/22 bzw. 24/24 58/11 bzw. 62/12
48/13 22/21 24/23 60/11 64/12
50/13 22/20 24/22 62/11 68/12
52/13 22/19 24/21 64/11 70/12
54/13 22/18 24/20 68/11 74/12
38/15 22/32 24/34 42/11 44/12
40/15 22/30 24/32 44/11 46/12
42/15 22/28 24/30 46/11 50/12
44/15 22/26 24/29 48/11 52/12
46/15 22/25 bzw. 24/28 50/11 bzw. 54/12
48/15 22/24 24/26 52/11 56/12
50/15 22/23 24/25 54/11 58/12
52/15 22/22 24/24 56/11 62/12
54/15 22/21 24/23 60/11 64/12
38/16 22/34 24/36 38/11 42/12
40/16 22/30 24/34 40/11 44/12
42/16 22/32 24/32 42/11 46/12
44/16 22/28 24/32 44/11 48/12
46/16 22/27 bzw. 24/30 46/11 bzw. 50/12
48/16 22/26 24/28 48/11 52/12
50/16 22/25 24/27 50/11 56/12
52/16 22/24 24/26 52/11 58/12
54/16 22/23 24/25 54/11 60/12
40/17 22/34 24/36 38/11 42/12
42/17 22/32 24/34 40/11 44/12
44/17 22/30 24/34 42/11 46/12
46/17 22/29 bzw. 24/32 44/11 bzw. 48/12
48/17 22/27 24/30 46/11 50/12
50/17 22/26 24/29 48/11 52/12
52/17 22/25 24/28 50/11 54/12
54/17 22/24 24/27 52/11 56/12