All cables must be connected prior to mounting the Rohloff E-14 DC/DC-CAN Converter into the frame.
The correct length 6-Pol adapter cable with lilac connectors (4), must be routed through the chainstay and connected to the Rohloff E-14 DC/DC-CAN Converter (2).
The black, 6-Pol Hirose connector of the Rohloff E-14 DC/DC-CAN Converter must be connected to the black, 6-Pol Hirose connector of the Bosch eBike system.
The 4-Pol Rohloff E-14 Switch Unit cable with the blue connectors, must be threaded through the Bosch bracket and up to the handlebar.
The Rohloff E-14 DC/DC-CAN Converter can now be inserted into the seattube or downtube, through the Bosch bracket. Foam or rubber may be used to secure this in place and avoid possible rattling later in use.
Pay close attention to the seatpost adjustment room available, if mounting the DC/DC-CAN converter inside the seattube.