HOME > PRODUCTS > SPEEDHUB > Tools
German
English

Tools for the SPEEDHUB 500/14

Rohloff sprocket tool

Sprocket tool

The sprocket of the Rohloff SPEEDHUB 500/14 is secured to the gearbox over a six start thread. To remove the sprocket with a chain-whip, the driver must be firmly held in place. This is the job of the sprocket tool. It is placed over the driver, secured by a quick release lever (CC versions) or axle nut (TS versions) and can then be held firmly in position with a 24mm wrench.

Info: The method illustrating how to reverse and/or replace the SPEEDHUB sprocket is shown in the Owners Manual - Service and Repairs section.

 

 

The Rohloff Sprocket tool is available using the following Article No.:

Description: Article No.
Sprocket tool for CC/TS 135mm/170mm 8501 (changed into 8508)
Sprocket tool for CC/TS 135mm/170mm and 142mm/177mm with A12 Adapter/Screw 8508
Sprocket tool XXL for CC 190mm/A12-197 with A12 Adapter/Screw 8509


 


Rohloff hub/shifter cable measuring aids

Cutting guide and Measuring tube

External gear mech Measuring tube 200mm
For measuring the shifter cables of the external gear mech to the correct length of 200mm. It is simply placed over the shifter cable that is to be shortened and then the protruding cable from the other end of the tube can be simply trimmed off using sharp wire cutters.

Internal gear mech Measuring tube 165mm
For measuring the hub cables of the internal gear mech to the correct length of 165mm. It is simply placed over one end of the hub cable that is to be shortened and then the protruding cable from the other end of the tube can be simply trimmed off using sharp wire cutters. The refitment of the concertina tubes is also simplified with the aid of this tool, the concertina tubes can be simply threaded over the measuring tube before the tool is removed from the shortened hub cable. This ensures that the shortened hub cable end does not get damaged by the concertina tube refitment procedure.

Cable hook
For measuring the shifter cables of the internal gear mech to the correct length (length varies according to the frame type). It eliminates the guess-work of calculating the correct cable length and guarantees a quick and safe fitment of the shifter cables.

A full description of these articles and their correct use can be found in the Rohloff SPEEDHUB 500/14 Owners Manual or in the instructions supplied with each article.


The Rohloff cable measuring aids are available using the following Article numbers:
Description: Article. No.:
Cable Measuring tubes 200mm and 165mm (for External and Internal gear mechs) 8713
Cable hook (for Internal gear mech) 8506


 


Tackle box SPEEDHUB 500/14

Tackle box

  •  provides a fast and competent service
  •  avoids waiting periods for the customer
  •  holds order in the workshop
The Box contains the following Articles:
<strong>8700 Box complete 1</strong>
8190 Rubber grip for twist shifter light" 1
8191 Twist shifter cable stoppers 1 and 14 for twist shifter light" 2
8193 TX20 screws and clamp for twist shifter light" 1
8194 Cable pulley for twist shifter light" 1
8201 Rubber grip for twist shifter 1
8203 Twist shifter cable stopper screws TX20 1
8204 Twist shifter clamp screws 1
8205 Drain screw 1
8221 16 tooth sprocket (steel) standard 1
8229 Torque Arm Quick Release Head 1
8231 Torque Arm screws with washers 1
8236 Axle-plate Torx screws (6 pcs.) 2
8243 Chainring spacers (5 units) 1
8248 Conversion kit Chain Tensioner 1
8251 Chain Tensioner jockey wheels 1
8256 Distancing washers for Chain Tensioner (4 units) 1
8260 Cable Guide 0° with frame clamp 1
8262 Pipe Clamps for Art.No. 8240 1
8263 TS Axle nuts (M10 x 1) including washers 1
8268 DB/EX shifter cable set: 2x inner (1.1mm) + housing 1.8m 1
8269 Super Noodles (pair) as Kit in 8268 0
8271 Hub cables for Internal incl. tubes and ties 1
8274 Bayonet connectors, 1x male type, 1x female type 1
8275 Freewheel springs (2 units) 1
8295 Owners Manual Rohloff SPEEDHUB 500/14 1
8410 Oil change kit (with syringe, drain screw and filler hose) 1
8501 Sprocket tool 1
8504 TX20 Torx T-Grip key 1
8506 Cable hook for shifter cables (internal gear mech) 1
8570 Grub screw bayonet connectors 1
8573 Hub cable Easy Set (from Serial no. 25300) 1
8703 Shifter cable housing cap set (10 pcs.) 1
8704 Cable adjusters for cable box 1
8706 Washer and circlip for Chain Tensioner 1
8707 Bolt and circlip for locating fork (long torque arm) 1
8709 Bayonet springs 1
8710 Paper gasket kit for axle-ring 1
8713 Set of hub/shifter cable measuring aids 165mm + 200mm 1