FAQ details

PITLOCK available for the Rohloff SPEEDHUB 500/14

The pitlock set M10 Rohloff mono is recommended for frames which incorporate dropouts that are thicker than 8mm and use a TS axle. For this you will require the appropriate Rohloff axle plate with a longer axle stud.

 

8228L TS OEM2 long
8233L TS Standard axle plate long
8235L TS OEM long

 

Frames that utilize dropouts thinner than 7mm can use the PITLOCK Securing Set M10 Rohloff dual for mounting. Make sure that the threads protrude the dropout slot far enough to mount the securing components.

 

Safety-catch for (slideable) rear bolted dropouts:

This new safety-catch is for bolt-on adjustable dropouts and is designed to prevent an easy removal of your rear wheel. Dispite having a PITLOCK securing the rear wheel, it is still possible that a thief may be able to steal the complete rear wheel simply by unbolting the not-protected rear dropouts.  To prevent or to hinder this, it is now possible to mount this PIT- dropout security system.

 

All important information can be found on the homwpage of Pitlock!

---