HOME > DOWNLOAD > Video > Workshop
Deutsch
English

WORKSHOP

Attention with the use of video-data:

The videos are simply a visual addition to our owners manual which is attached to each delivered SPEEDHUB 500/14. The demonstrations on the video do not substitute the written owners manual. We point out the videos are made without any mentioning of measurements namely drive-torques, masses, sizes or other technical details which are essential to the correct mounting.

The fact should not be excluded that without utilising the written owners manual as a guide, an incorrect and incomplete mounting will most probably occour, this is simply because not every step of mounting procedure is shown on the video. Mounting, based only on the video-data is not permitted.

These videos are about the Rohloff Seminar Tour 2002/2003. They can be downloaded from our homepage for tutorial use.

Cutting aid

Mounting internal gear mech with the cutting aid for shifter cables.
view video

Download Cutting aid (10,9M)


Hub seal replacement

Only with SPEEDHUB 500/14 incorporating Serial-Numbers after 25300!

view video

Download Hub seal replacement (14,9M)


Cable guide

Optimal cable routing from the shifter to the rear of the frame.
view video

Download Cable guide (3,8M)


Cable replacement (after 2003)

Changing the hub cables with an internal gear mech and the  "quick-change axle ring".
view video

Download Cable replacement after 2003 (26M)


Cable replacement (before 2003)

Changing the hub cables with an internal gear mech.
view video

Download Cable changing bevor 2003 (21M)


External cableguide

Mounting of the external gear mech before mounting cables from the shifter to the rear of the frame.
view video

Download External cable guide (10,5M)


Sprocket changing

What to be aware of when replacing or rotating a sprocket.
view video

Download Sprocket changing (3,5M)


Oil Change

How do I change the oil? Here is a little help!
view video


Download Oil Change (10M)